Equipments (I) Pvt. Ltd.
Our Address
New Delhi, India
Call Us Any Time
+91-9971077233 +91-9871061108
Send An Email
sales@sunlabtech.com info@sunlabtech.com
Working Time
Mon To Sat 9AM to 9PM
We supply varieties of high quality and all international standard testing equipments and accessories to test in Concrete testing lab equipment or concrete testing machines, cement, soil, bitumen, aggregate, rock testing lab equipment and steel testing lab equipment, different types of apparatus and accessories at reasonable rates with timely delivery.
LabTek make Compression Testing Equipment Manually (Hand) Operated fitted with single load gauge. The loads are measured on Bourdon tube type load gauges which are calibrated against certified proving rings. The load gauges are fitted with a maximum load pointer.
Compression Testing Equipment Electrically cum Manually (Hand) Operated. In the Electrically Operated Pumping Units, load gauges are fitted with micro switches to switch-off the motor when the load approaches the maximum capacity of the gauge, avoiding any over loading.
The Digital Compression Testing Machine has been designed to meet the need for a simple, economic and reliable means to test concrete for its compressive strength. The Digital Indicator incorporates a 4-Digits display calibrated in Kilo Newton (KN)
LabTek make CE certified Fully Automatic Compression Testing Machine with all distance platens for 150 mm cube/100 mm cube 150 x 300 mm cylinders, software. The automatic range of 3000 kn capacity compression testing machines has been designed to meet the need for reliable and consistent testing of concrete samples.all labtest machines feature the ….
The Flexure Strength Testing Machines are designed to test flexural strength of concrete beams. The design provide maximum rigidity throughout their working range. The load is applied by the downward movement of the piston. A spacer is provided for testing different size of beams. The load is indicated on a calibrated bourdon tube type load ….
Concrete Cube mould of different sizes and standards, Beam mould, Cylindrical mould is manufactured using premium quality raw material and sophisticated technology by our proficient professionals. Our offered concrete mould is precision-designed in various sizes and designs so as to meet the demands of our clients and …
The slump test measures the consistency of fresh concrete before it sets. It is performed to check the workability of freshly made concrete, and therefore the ease with which concrete flows. It can also be used as an indicator of an improperly mixed batch. The test is popular due to the simplicity of apparatus used and simple and ………
Mixing of concrete is essential if quality specimens are to be manufactured. Pan type mixers are suitable for mixing small quantities of concrete in the laboratory. The mixing pan tilts for easy access to the pan and emptying on completion of the mixing operation. Volume of the pan is 108 litres but capacity of the mixer is 56 litres and .……
Designed to undertake a more precise and sensitive test procedure than the simple slump test. The apparatus consists of two conical hoppers mounted on a cylinder. Each hopper has a hinged flange with quick release mechanism and everything is mounted on a rigid steel stand. The compacting factor is the ratio between the weight and…..
A leading supplier & Manufactrurer of Concrete Permeability Apparatus, India.Concrete Permeability Apparatus fully automatic apparatus is designed to carry out water permeability tests on cubic concrete specimens max.150 mm side. One of the durability test of concrete is to determine permeability of water through specimen and…..
Sun LabTek is Manufacturer and supplier of civil engineering lab equipment, Construction material testing equipment. Concrete testing machines, for carrying out Accelerated curing of concrete samples in laboratory. LabTek offers an extensive range of accelerated curing tanks available in various sizes and for hot, warm & cold method and……
Manufacturer, supplier and Exporter of Vee Bee Consistometer offered by Sun LabTek.To determine the workability of fresh concrete by using a Vee-Bee consistometer as per IS: 1199 – 1959. The apparatus used is Vee-Bee consistometer. The Veebe consistometer measures the remolding ability of concrete under vibration…
Manual Flow Table is used in determining flow and consistency when preparing mortars for testing and recommended when strict compliance with standards is not required. Motorized Flow Tables determine consistency in the preparation of mortars for testing, but with controlled rates that comply with ASTM and AASHTO standards….
Proper compaction of cement concrete while casting specimens for compression testing is essential to achieve higher compressive strength . LabTek Vibrating Table is ideally suited for this purpose. The table top is suitable to hold cube moulds and has stops along its….
J Ring Apparatus is used to determine the flowability and passing ability of self-
U Box Apparatus: Stainless Steel U-Box with smooth inside walls. Four vertical reinforcement bars form a flow obstacle. The bars are 10mm in diameter with 35mm daylight between them. A guillotine gate splits the vertical portion of the box from the horizontal one. Dimensions: 480mm x 250mm …
The stainless steel ‘L’ Box consists of: Funnel top container with rigid surfaces inside, 3 x 16mm diameter vertical bars with free light of 38 mm forming the obstruction at the bottom of the chute, Guillotine gate, Two marks are engraved on the horizontal bottom position at 200mm and 400mm, …
The apparatus consists of a container (transparent) with a flat and smooth surface. In the container are 35 obstacles are made of PVC with a diameter of 20mm and a distance centre to centre of 50mm, see figure. At the top side is a put filling pipe (diameter 100mm height 500mm) with a funnel...
V-funnel test apparatus: Used for the determination of flow time in a V Funnel to EN 11042. The upper edge of the stainless steel funnel is smooth and reinforced, with a valve on the bottom opening. Dimensions: 510mm x 400mm x 1000mm with stand, Weight: 40kg with stand..…..
The standard 100 cc Volume Change Apparatus is designed to utilize either a standard LSCT or a Digital Gauge for measuring the volume change. The Volume Change Apparatus comprises a change over valve system, which provides an unlimited capacity by ..…..
The apparatus can be used for three basic tests: Initial drying shrinkage, The difference between the length of the cured specimen and the length when it is dried. Drying shrinkage :The difference between the length of the specimen from Concrete testing lab equipment ..…..
It is designed for finding out the deformation and strains on 15cms. Diameter and 30 cms. High cement concrete cylinders when subjected to compressive loads. Consists of a frame with a bottom ring and a top ring with tightening screws to firmly clamp the compressometer over the cylinder...
Concrete testing lab equipmentThe lateral extension is indicated on a dial gauge of 0.002mm x 12mm travel.
Used to determine the setting time of the mortar fraction in concrete mixes with slump greater than zero, by testing mortar sieved from mix. The apparatus consists of a spring penetrometer (capacity 100 Kgf, precision 1 Kgf) and six interchangeable stainless …
Concrete Testing lab equipment: A mechanical lifting device is used to raise the water tank through the frame height immersing the specimen suspended below the balance. The balance supplied may also be used as a standard weighing device, thus providing a versatile and comprehensive weighing system in the ..
Used to measure the thickness of concrete cover over steel reinforcement bars and metal pipes, furthermore it is also used to identify the location, orientation and diameter of reinforcement bars (rebar). The basic unit can be completed with a number of optional probes for various determination. The Bartracker...
Vibratory Hammer for Concrete Moulds: Special purpose machine adhering to International Specification such as (BS En, ASTM, AASHTO, DIN, NF, IP, BIS).Apart from our wide range of equipment such as Soil Testing in the Field; Lab Tests for Soil; Geo-technical testing; Fresh Concrete Testing or Strength Testing; NDT for Concrete…
Concrete Test Hammer: The Schmidt hammer requires no corrections for angle of test, simple one button operation, datalogging capability with USB download with detailed reporting capability. Impact Energy 2.207Nm. Compressive strength range 10~170MPa. Battery Life >1000 Impact…
Demountable Mechanical Strain Gauge: A demountable mechanical strain gauge has advantages of accuracy, reliability and cost over other methods of strain measurement. However, the desired accuracy is only obtained by precision manufacture and care in the use of the instrument….
Prism Mould LabTek: Used for determining the effect of aggregates on the drying shrinkage of concrete. The test is based on the testing of concretes of fixed mix proportions and aggregates of 20 mm max. size. To complete the test, the Length comparator should also be used. Made from steel. …
K-Slump Tester: This device is used to determine the workability and degree of compaction of fresh concrete after being placed in the forms. It can be used for in-situ measurements or inside test moulds and forms. Results can be correlated against the slump test.The operation is very simple: insert the tester ...
Kelley Ball Penetration Apparatus: Used to test the consistency of concrete using the penetration of a half sphere into plastic concrete. A 1″ (2.5-centimeter) penetration by the kelly ball corresponds to…
Initial Surface Absorption Test (ISAT) Apparatus: This apparatus is used to assess the surface absorption characteristics of concrete.The rate of flow of water per unit area into a concrete surface when subjected to a constant head of 200mm is measured. The unit consists of a capillary tube mounted on a scale, a water ..
Pocket Concrete Penetrometer: Lightweight, spring-reaction type concrete penetrometer for field and lab evaluation of the initial set of concrete mortar, based on ASTM C403. Penetration plunger has a 1/20 sq. in. tip area...
Bleeding Of Freshly Mixed Concrete: This test method is used to determine the relative quantity of mixing water that will bleed from a sample of freshly mixed concrete having aggregates with 50mm max size…
Tamping rod for concrete cube: Concrete testing lab equipment tamping bar for use with concrete test cube moulds. Milled with a 25mm square face. Weight 1.8kg. standard Concrete Cube mould ...
Sun LabTek is manufacturer, supplier and exporter of construction material testing lab equipments, building material testing lab equipments and concrete testing machines. Concrete testing lab equipmet for use wit……
Straight Edge:For striking-off samples in containers, measures or molds. Ground steel with beveled edge. The Straight Edges supports the following standards: LabTek India supplies and manufacture ASTM C185, ….
Poker Vibrator: portable, petrol operated. Honda motor, 4-stroke, 1,6HP, 35,8cc,Tip dimensions: 25 mm dia. by 250 mm long. Flexible shaft: 2 metres long. Frequency: 10000 vibrations/min.Supplied complete with knapsack. Weight: 7 kg approx.
Sand Absorption Cone And Tamper: Used for specific gravity and absorption of fine aggregates. The equipment comprises of a conical metal mould 1.5” dia at the top, 3.5” dia at the base and 2.7/8” in height and a metal tamping rod weighing 12 ounces and having a flat circular tamping face 1” dia..
Sun LabTek offers Rapid Chloride Permeability Test Apparatus. Rapid Chloride Permeability Test Equipment (RCPT) has multi-port testing facilities is designed to test concrete samples of 100mm diameter with 50mm thickness for concrete ion permeability test for civil engineering...
Concrete Test Hammer (Schmidt Hammer) N Type is used for the non-destructive testing of the surface of hardened concrete in order to evaluate the strength in various parts of a structure.The concrete hammer is supplied complete with plastic carrying case, grinding stone ...
Electronic Concrete Test Hammer (Schmidt Hammer) measurement using the quotient of the impact and rebound velocities increases the sensitivity in so the hammer test is now possible between 10-100MPa and is not effected by gravity making the unit useful in 360deg of operation with ..
Test Hammer Calibration Anvil: Concrete testing lab equipment : verifies proper operation and rebound energy of Concrete Test Hammers from most manufacturers. It has a hammer guide and hardened alloy steel rebound plate with 66±2 HRC hardness, to provide a minimum rebound …
The measurement of pulse velocity can be used for the determination of the uniformity of concrete, the presence of cracks or voids, changes in properties with time and in the determination of dynamic physical properties. EN 12504:4 gives guidance on testing fresh concrete, hardened concrete ...
Concrete testing lab equipment: Elcometer 506 adhesion tester’s quick connect coupling allows the simple attachment of 14.2mm, 20mm or 50mm diameter dollies which, together with a wide range of accessories, allows coating adhesion testing on flat, curved, thick and thin substrates ..
Crack Measuring Microscope: Concrete testing lab equipment: A high quality microscope designed for measuring crack widths in concrete members, masonry walls and other structures. The apparatus operates by an adjustable lamp unit and the image is focused by turning a knob. The eyepiece ...
Concrete testing lab equipment: The PET (Pile Echo Tester) uses the Pulse-Echo method (PEM) for quick pile integrity test (quality control) of a large number of piles.The pile top is struck with a lightweight handheld hammer. The reflected wave is captured and analyzed by...
Concret testing equipment: The latest microwave and microprocessor, the Cementometer can determine the moisture content of freshly mixed cement, concrete, and mortar ..
Table top scales comprises of digital counting scale, series balance, counter table top scale etc. Every component used in our scales is stringently quality tested to assure clients of product excellence. These weighing scales are extensively used in grocery shops, confectioneries and more...
Digital sieve shaker designed to outperform comparably priced equipment. The 1/4hp unit is widely accepted by state transportation departments for highway materials testing. Back and forth lateral motion is combined with up and down and tilting motions causing test material to travel in..
Test sieves are woven wire or perforated metal pans that are used for sifting and filtration. Test sieves are accurately constructed by placing wire cloth between two suppressed die formed frames. Stainless steel or brass is generally used in the construction of both the frame and woven wire mesh…
Jolting Apparatus: This machine, used to compact the 40x40x160 mm cement prisms in the mould, has been developed to fulfill precisely Prism moulds, feed hopper, scrapers and glass plate are not included and have to be ordered separately.
Tensile (Briquette) Testing Machine that is used for testing various materials like rubber, plastic and cable. The offered testing machine is manufactured using optimum quality components and sophisticated technology in line with industry standards. Available with steel yard having double…
Air Entrainment Meters are used for determining the air content of fresh concrete. They consist of a flanged 7 or 8 liter capacity cylindrical vessel and cover assembly incorporating a pressure gauge, air pump and valves.
The container laboratory is the first equipment on the job-site and a smart, efficient, well equipped unit is the best introduction for a contractor. A wide range of accessories makes the laboratory completely independent and …..
Flexural Frame is designed for minimum deflection at maximum load resulting in very high accuracy. The load frame is a four column design carrying the ram fitted to the upper crosshead.
We supply varieties of high quality and all international standard testing equipments and accessories to test in Concrete testing lab equipment or concrete testing machines, building and civil engineering laboratory equipment and accessories.
concrete testing equipment suppliers, concrete testing equipment list, concrete strength testing equipment, concrete testing machine price, concrete compressive strength testing machine, concrete lab equipment suppliers, concrete testing machine name, concrete testing equipment suppliers in india, concrete testing machine, Concrete testing lab equipment, concrete testing machine price, concrete testing machine name, concrete testing equipment suppliers, concrete testing equipment list, concrete compressive strength testing machine, concrete strength testing equipment, concrete lab testing equipment.
Office Telephone: +91-9971077233
Office Mobile: +91-8595806705
Sun LabTek Equipments (I) Pvt. Ltd. B-3A, Shiv Shakti Complex, East Vinod Nagar, New Delhi-110091, India
Email: info@sunlabtech.com
Inquiries: sales@sunlabtech.com