LabTek is one of the leading manufacturer, supplier & exporter of the Refrigeration and Air conditioning Lab Equipment or Refrigeration Trainer set up and Air conditioning Trainer set up with simlation software.
We Manufacture Air Conditioning System Trainer, Basic Refrigeration And Air Conditioning Training System, Bench Top Mechanical Heat Pump Trainer, Bench Top Vapour Absorption Refrigeration Trainer, Computerized Air Conditioner Trainer, Computerized Bench Top Cold Storage Trainer, Computerized Cascade Refrigeration Trainer, Computerized Cooling Tower Test Bench, Computerized ICE Plant Trainer, Computerized Recirculating Air Conditioning Trainer, Cut Section Model Of Hermetic Compressor , Cut Section Model Of Open Hermetic Compressor, Cut Section Model Of Rotary Hermetic Compressor, Cut Section Model Of Semi Hermetic Compressor, Gas Charging Trainer, Refrigeration Assembly And Maintenance Accessories, Vapour Compression Refrigeration Trainer, Vapour Jet Refrigeration Trainer etc.. Also We do manufacture the Test Rigs as per customers requirement.
Air Conditioning System Trainer: refrigeration and air conditioning lab equipment: The “LabTek” Air Conditioning System Trainer represents a complete air conditioning system with an air duct and a climatic chamber. The main components of the air conditioning system are the air cooler with condensing unit, fan, steam humidifier…
Basic Refrigeration And Air Conditioning Training System: refrigeration and air conditioning lab equipment: The “LabTek” Basic Refrigeration And Air Conditioning Training System main components are compressor, condenser and receiver plus electrical and communications systems. The models are plugged onto the base….
Bench Top Mechanical Heat Pump Trainer: refrigeration and air conditioning lab equipment: The “LabTek” air-to-water heat pump trainer consists of a compressor, an evaporator with fan, a thermostatic expansion valve and a coaxial coil heat exchanger as condenser. All components are clearly arranged in the trainer…
This Laboratory scale working model housed on a M.S. Square tube frame further mounted on a wheels (CI) with nstrumentation panel is used i) To study the Vapour compression Cycle ii) To calculate co-efficient of performance (COP) iii) To evaluate tonnage capacity.
This Laboratory scale working model housed on a M.S. Angle frame further mounted on a wheels with instrumentation panel is used to determine i) The working of ICE Plant ii) Co-efficient of performance (COP) and iii) Refrigeration circuit.
Laboratory scale working model housed on a M.S. Square tube frame further mounted on a wheels (CI) with instrumentation panel is used i) To study the Vapour Compression Cycle ii) To calculate co-efficient to performance (COP)
Vapour Absorption Refrigeration Trainer: refrigeration lab equipment: The “LabTek” basic principle is demonstrated in the experimental unit with the example of an ammonia-water solution with the ammonia acting as refrigerant. Absorption refrigeration systems operate using thermal energy e.g. from industrial waste heat …
Computerized Air Conditioner Trainer: refrigeration lab equipment: The “LabTek” Air conditioner trainer examines the operation and effect of the individual components of an air conditioning system. Includes all the components also used in building services engineering. Particular importance was placed on the use of original …
Computerized Bench Top Cold Storage Trainer: refrigeration lab equipment: The “LabTek The trainer features a large refrigeration chamber. Two evaporators allow for an investigation of the effect of different evaporator sizes on the cold storage room climate and the icing. An electric defrost heater and hot gas defrosting….
This Laboratory scale working model housed on a M.S. Square tube frame and further mounted on a wheels(CI) with instrumentation panel is used. i) To study the vapor compression refrigeration cycle ii) To calculate Co-efficient of performance (C.O.P.)
M.S. Square tube frame and further mounted on a wheels (CI) with instrumentation panel is used i) To study the performance of vapour compression Refrigeration system using water cooled condenser / water cooled evaporator,
Laboratory scale working model housed on a M.S. Square tube frame further mounted on a wheels (CI) with instrumentation panel is used i) To study the Vapour Compression Cycle ii) To calculate co-efficient to performance (COP)
Computerized Cascade Refrigeration Trainer: air conditioning trainer: The “LabTek” cascade Refrigeration systems with two-stage compression are used for the generation of particularly low temperatures. At very low temperatures large pressure differences are required between the evaporator and condenser. In a compressor…
Computerized Cooling Tower Test Bench: air conditioning trainer: The “LabTek” examines the main components and principle of a wet cooling tower with forced ventilation. Water is heated in a tank and transported by a pump to an atomizer. The atomizer sprays the water to be cooled over the wet deck surface. The water trickles from the …
Computerized ICE Plant Trainer: air conditioning trainer: The “LabTek” The unit enables the students to study the Basic Principals of ice plant cycle within a short period. The test rig is designed for the study of thermodynamics of vapour Compression refrigeration cycle by way of demonstration and experimentation. It has a facility to…
This Laboratory scale working model housed on a M.S. Square tube frame and further mounted on a wheels(CI) with instrumentation panel is used. i) To study the vapor compression refrigeration cycle ii) To calculate Co-efficient of performance (C.O.P.)
This Laboratory scale working model housed on a M.S. Square tube frame along with instrumentation panel is used To determine i) the tower characteristic (KVA/L Value), ii) The made up water flow rate and iii) To plot end states on a psychometric chart which can be …
This Laboratory scale working model housed on a M.S. Square tube frame and further mounted on a wheels (CI) with instrumentation panel is used i) To study the vapor compression refrigeration cycle ii) To calculate Co-efficient of performance (COP).
Computerized Recirculating Air Conditioning Trainer:refrigeration and air conditioning lab equipment: The “LabTek” This training unit allow students to investigate air conditioning at a basic level. Students can use P-H charts and psychometric charts for their calculations and discover the enthalpy change. The unit features an …
Gas Charging Trainer: refrigeration and air conditioning lab equipment: The “LabTek” Enables the student to study how to empty and evacuate a refrigeration unit with the aid of a vacuum pump. Then, the unit can be charged with the correct amount of refrigerant. FEATURES: Evacuating a refrigeration system….
Refrigeration Assembly And Maintenance Accessories: refrigeration and air conditioning lab equipment: The “LabTek” unit trainees can learn working within a complex project. This involves the planning, implementation and checking of processes related to assembly, commissioning and maintenance. The assembly relates to refrigeration….
This Laboratory scale working model housed on a M.S. Square tube frame and further mounted on a wheels(CI) with instrumentation panel is used. i) To study the vapor compression refrigeration cycle ii) To calculate Co-efficient of performance (C.O.P.)
This Laboratory scale working model housed on a M.S. Square tube frame along with instrumentation panel is used To determine i) the tower characteristic (KVA/L Value), ii) The made up water flow rate and iii) To plot end states on a psychometric chart which can be …
This Laboratory scale working model housed on a M.S. Square tube frame and further mounted on a wheels (CI) with instrumentation panel is used i) To study the vapor compression refrigeration cycle ii) To calculate Co-efficient of performance (COP).
Vapour Compression Refrigeration Trainer: The “LabTek” experimental unit represents a typical refrigeration circuit consisting of a hermetic piston compressor, condenser, expansion valve and evaporator. The evaporator and condenser are transparent to provide good monitoring of the phase transition process during evaporation and….
Vapour Jet Refrigeration Trainer: The “LabTek” Unlike standard compression refrigeration systems, vapour jet refrigerating machines do not have a mechanical but a vapour jet compressor. This makes it possible to use different heat sources for cold production. Such sources could e.g. be solar energy or process waste heat…..
Refrigeration Assembly And Maintenance Accessories: The “LabTek” kit contains all the parts required to construct the compressor. The compressor fits are designed so as to allow the complete assembly process to be carried out by hand. All parts are laid out clearly and are well protected in a sheet-steel toolbox. Small parts …
Cut Section Model Of Open Hermetic Compressor: Refrigeration and Air conditioning lab equipment: The “LabTek” Cut Section Model Of Open Hermetic Compressor model will be made out of original parts. The model will be suitably sectioned to demonstrate the internal construction details showing the minute information….
Cut Section Model Of Rotary Hermetic Compressor: Refrigeration and Air conditioning lab equipment: The “LabTek” Rotary Compressor (Actual Cut Section) this model will be made out of original parts. The model will be suitably sectioned to demonstrate the internal construction details showing the minute information…
Cut Section Model Of Hermetic Compressor: Refrigeration and Air conditioning lab equipment: The “LabTek” Cut Section Model Of Hermetic Compressor model will be made out of original parts. The model will be suitably sectioned to demonstrate the internal construction details showing the minute information, and working of the…
Products Collection
The best way to experience wide collection of products is to visit the store.
