Complete range of full depth testing sieves 200, 250, 300, 315 and 450 mm dia. All frames, except the 450 mm dia. -made of sheet steel- and wire cloth sieves are manufactured from stainless steel. Perforated plates are made from tinned steel. Sieves having the same nominal dia. are designed to nest one in each other. Using 200 mm sieves (8”) is possible to test up to 1000 g of aggregates and 3000 g with 300 mm (12”) dia. The sieves specifications are clearly marked on the label comprising the serial number and other information for the identification and traceability of the product as requested by the international specifications.
Important note The EN standards specify that: “Sieves with aperture size of 4 mm and above shall be perforated plate square hole test sieves. Below that size they shall be woven wire test sieves”. See Sieves, EN, woven metal plate
Standards:
Specification:
(BS 410) (IS 460 part 1.1985) ASTM E 11 micron (Aperture) – 4.75 mm 4 4750 4 4.00 mm 5 4000 5 3.35 mm 6 3350 6 2.80 mm 7 2800 7 2.36 mm 8 2400 8 2.00 mm 10 2000 10 1.70 mm 12 1680 12 1.40 mm 14 1400 14 1.18 mm 16 1200 16 1.00 mm 18 1000 18 850 micron 20 850 22 710 micron 25 710 25 600 micron 30 600 30 500 micron 35 500 36 425 micron 40 425 44 355 micron 45 355 52 300 micron 50 300 60 212 micron 70 0 85 180 micron 80 180 100 150 micron 100 150 120 125 micron 120 125 150 106 micron 140 106 170 90 micron 170 90 200 75 micron 200 75 240 63 micron 230 63 300 53 micron 270 53 350 45 micron 325 45 400 38 micron 400 38 500 25 micron – 25 Lid & Receiver Brass for 200mm dia or 8” dia sieves.