Menu

Series Parallel Pumps

LabTek is one of the leading manufacturer, supplier & exporter of the Fluid mechanics lab equipment or Hydrology lab equipment. We Manufacture Flow Meter Demonstration Unit, Computer Controlled Subsonic Wind Tunnel, Multi-Purpose Teaching Flume, Fluid Friction Measurements, Complete Fluid Mechanics Laboratory – axial fan demonstration unit, F1-10, Osborne Reynolds’ Apparatus, Air Flow Studies, Fluid Properties & Hydrostatics Bench, Hydrogen Bubble Flow Visualisation System, Subsonic Wind Tunnel, Laminar Flow Table, Multi-Pump Test Rig, Pipe Surge and Water Hammer Apparatus, Pipe Network Apparatus, Compressible Flow Unit, Precision Pressure Gauge Calibrator, Particle Drag Coefficients, Dead Weight Pressure Gauge Calibrator, Hydrostatic Pressure etc.. Also We do manufacture the Test Rigs as per customers requirement. At LabTek, we understand the dynamics of each customer requirement of Fluid mechanics lab equipment or Hydrology lab equipment and the variety of demands of their experimental & research system. We help you with innovative design Fluid mechanics lab equipment or Hydrology lab equipment that makes the system more reliable, robust, cost-effective and economical in long run, saving substantially on your power and maintenance cost. series parallel pump test apparatus, pumps in series and parallel, pumps in series applications, parallel operation of centrifugal pumps, series and parallel pump characteristics.

[siteorigin_widget class=”SiteOrigin_Widget_Button_Widget”][/siteorigin_widget]
[siteorigin_widget class=”SiteOrigin_Widget_Button_Widget”][/siteorigin_widget]
[siteorigin_widget class=”SiteOrigin_Widget_Button_Widget”][/siteorigin_widget]
[siteorigin_widget class=”SiteOrigin_Widget_Image_Widget”][/siteorigin_widget]

SERIES & PARALLEL PUMPS

Model NO-FM-034

DESCRIPTION: The “SUNLABTECH” Module features a closed water circuit with a water tank and two centrifugal pumps with drive motors. The speed of one motor is variably adjustable by a frequency converter. The other pump is fitted with a motor with fixed speed; this pump can be added to the system. The impellers of both pumps are mounted in transparent housings and can be observed during operation. Valves enable to easily switch change between single pump, series or parallel pump operation. The system behaviour is analysed with the aid of a valve at the outlet of the pump adjusting the flow resistance.

In complex systems, pumps can be connected in series or in parallel. In serial operation the heads of the pumps are added and in parallel operation the flow rates (capacities) of the pumps are added.

The experimental unit provides the determination of the characteristic behaviour for single operation and interaction of two pumps.

FEATURES:

  • Investigation and operating behavior of pumps in various operating modes
  • Single pump, series or parallel pump operation, configurable via valves Closed water circuit contains centrifugal pumps with drive motor and a transparent water tank
  • One pump with variable speed and one pump with fixed speed
  • Adjustment of flow resistance by a valve at outlet of the pump
  • Sensors for pressure at inlet and outlet of the pumps and flow rate
  • Due to integrated microprocessor-based instrumentation no additional devices with error-prone wiring are required
  • Display and evaluation of the measured values as well as operation of the unit via software

SPECIFICATION:

  • Centrifugal pumps with motors

Power consumption: 370W each

  • Pump with variable speed: 0…3300min-1

Max. Flow rate: 40L/min

Max. Head: 10m

  • Pump with fixed speed: approx. 2800min-1

Max. Flow rate: 40L/min

Max. Head: 10m

  • Water tank: approx. 15L
  • Measuring ranges

Pressure (inlet): ±1bar

Pressure (outlet): 2x 0…5bar

Flow rate: 10…140L/min

  • 230V, 50Hz, 1 phase

 

DIMENSIONS AND WEIGHT:

  • L x W x H: 800-x600 x 600 mm
  • Weight: 90kg
[siteorigin_widget class=”SiteOrigin_Widget_Tabs_Widget”][/siteorigin_widget]
[siteorigin_widget class=”SiteOrigin_Widget_Button_Widget”][/siteorigin_widget]
[siteorigin_widget class=”SiteOrigin_Widget_Button_Widget”][/siteorigin_widget]
[siteorigin_widget class=”SiteOrigin_Widget_Button_Widget”][/siteorigin_widget]
[siteorigin_widget class=”SiteOrigin_Widget_Hero_Widget”][/siteorigin_widget]

series parallel pump test apparatus, pumps in series and parallel, pumps in series applications, parallel operation of centrifugal pumps, series and parallel pump characteristics.

Like this:

%d bloggers like this: