LabTek is one of the leading manufacturer, supplier & exporter of the Fluid mechanics lab equipment or Hydrology lab equipment.
We Manufacture Flow Meter Demonstration Unit, Computer Controlled Subsonic Wind Tunnel, Multi-Purpose Teaching Flume, Fluid Friction Measurements, Complete Fluid Mechanics Laboratory – F1-10, Osborne Reynolds’ Apparatus, Air Flow Studies, Fluid Properties & Hydrostatics Bench, Hydrogen Bubble Flow Visualisation System, Subsonic Wind Tunnel, Laminar Flow Table, Multi-Pump Test Rig, Pipe Surge and Water Hammer Apparatus, Pipe Network Apparatus, Compressible Flow Unit, Precision Pressure Gauge Calibrator, Particle Drag Coefficients, Dead Weight Pressure Gauge Calibrator, Hydrostatic Pressure, Flow Over Weirs, Basic Metacentric Height, Bernoulli’s Theorem Demonstration, Impact of a Jet, Orifice and Free Jet Flow, Energy Losses in Pipes.
: The “LabTek” designed advanced axial fan produces gas flow by virtue of the momentum changes imparted across the rotary blades, parallel to the axis of rotation. Such fans are more suitable for higher flows at lower delivery pressures than their centrifugal counterparts. Comparison of the performance characteristics of the Axial Fan with those of the Centrifugal Fan thus provides an instructional exercise of valuable practical application….
The “LabTek” advanced meta-center can be varied to produce stable and unstable equilibrium. The equipment consists of a plastic rectangular floating pontoon, the center of gravity of which can be varied by an adjustable weight, which slides and can be clamped in any position on a vertical mast. A single plumb bob is suspended from the mast, which indicates the angle of heel on a calibrated scale. A weight with lateral adjustment ….
The “LabTek” advanced Bernoulli’s Theorem Demonstration module is mainly composed of a circular section conduit with shape of at truncated cone, transparent and with seven pressure taps to measure, simultaneously, the static pressure of each section. All the pressure taps are connected to a manometer with a water collector (water might be pressurized). The ends of the conduits are removable, enabling to be be placed …
Cavitation Demonstration: Fluid Mechanics lab equipment The “LabTek” advanced self-contained apparatus to demonstrate and observe the basic principles of cavitation and its implications on the performance of hydraulic machines and systems. The accessory consists of a circular Venturi-shaped test section manufactured from clear acrylic to enable visualization inside the section. As the flow of water increases the …
Centrifugal Fan Demonstration Unit: The” LabTek” advanced experimental unit provides the basic experiments to get to know the operating behavior and the most important characteristic variables of radial fans. Radial fans are used to transport gases with non-excessive pressure differences. The medium is drawn in axially to the drive shaft of the radial fan and is deflected by 90° ….
Centrifugal Pump Test Bed:.The”Labtek” advanced Centrifugal Pump Test Rig is a self-contained unit operated on closed circuit basis containing a sump tank. The set-up consists of a Centrifugal pump coupled with a DC Motor. Power input to the DC Motor is varied by means of a Thruster controlled DC Drive to vary the RPM of motor. A RPM Indicator with …
Compressible Flow Unit: A “LabTek” advanced versatile apparatus, based around a variable-speed air compressor, designed to teach the concepts of compressible flow. The basic unit contains everything required to demonstrate the fundamental principles, A radial fan with infinitely variable speed control draws in air from the environment. At the intake the airflow is accelerated in a measuring nozzle. Further down the measuring section the air flows …
Dead Weight Pressure Gauge Calibrator: The”LabTek” advanced equipment is self-contained and portable, so it may be used in lecture theatre demonstrations or as a master calibrator for the laboratory. Deadweight testers are the basic primary standard used worldwide for the accurate calibration of pressure gauges, pressure transducers etc. Deadweight testers are the basic primary standard used worldwide for …
Demonstration Francis Turbine: The “LabTek” experimental unit consists of the Francis wheel, the control device with adjustable guide vanes, a band brake for loading the turbine and a housing with a transparent front panel. The transparent cover enables you to observe the water flow, the wheel and the guide vanes during operation. Adjusting the guide vanes modifies the angle of incidence and thus the speed….
Demonstration Pelton Turbine: The “LabTek”experimental unit consists of the Pelton wheel, a needle nozzle used as distributor, a band brake for loading the turbine and a housing with a transparent front panel. The transparent cover enables to observe the water flow, the Pelton wheel and the nozzle during operation. Adjusting the nozzle needle modifies the nozzle cross-section and thus the flow rate.Water turbines are turbo machines utilizing waterpower…
Energy Losses in Pipes: The “Labtek” trainer includes ten pipe sections with different pipe elements. Four of the pipe sections are straight and designed with a constant cross-sectional area; they differ from each other in material and cross-section. One of the pipe sections includes three different types of flow diversion: pipe bend, pipe angle and segment bend. Two other pipe sections include various shut-off valves and fittings with different resistances. …
Flow Meter Demonstration Unit: The “SUNLABTECH” equipment consists of a Venturi meter, variable area meter and orifice plate, installed in a series configuration to permit direct comparison. A flow control valve permits variation of the flow rate through the circuit. Pressure tapping’s are incorporated so that the head loss characteristics of each flow meter may be measured. These tapping’s are connected to an eight-tube manometer bank…
Fluid Friction Measurements: The “Labtek” trainer comprises three straight pipe sections made of different materials and with different diameters. Also included are: a pipe section with pipe bends, a pipe section with contraction and enlargement and a pipe section with interchangeable valves and fittings. Knowledge of pressure losses in various pipe elements is a key factor in designing pipe systems. The trainer…
Fluid Properties & Hydrostatics Bench: The”SUNLABTECH” hydrostatics bench, numerous experiments on the topic of the hydrostatics of liquids and gases can be carried out. A pipe section and various pressure measuring devices are fitted to a laboratory trolley with a demonstration panel, working area and cabinet. Various measuring containers are integrated into the pipe section. The sealed water circuit and pump with supply tank permit …
Fluid Statics and Manometry: The “LabTek” has been designed to study static fluids and manometer. It provides the user an introduction to the behavior of liquids under Hydrostatic conditions (fluids at rest) and to the application of those Principles in the pressure measurement by using different monomeric Tubes. It allows the user to demonstrate the properties of Newtonian fluids and to understand a wide range of basic principles before studying Fluid….
Free and Forced Vortex: The ”LabTek” Free and Forced Vortex Apparatus for the study of the shape of ‘free and forced vortices’ consists of a cylindrical, transparent vessel, having two pairs of diametrically opposed inlet tubes of 9.0 mm and 12.5 mm diameter. The 12.5 mm diameter inlet tubes which are angled at 15° to he diameter, so that a swirling motion is imparted to the liquid entering the vessel, are used as entry tubes for the free vortex experiment. …
Gear Pump Demonstration Unit: The “LabTek” gear pump is the most widely used of the positive action rotary pumps. Two gear wheels operate inside a casing. One is driven while the other rotates in mesh with it. The liquid is carried around in the space between consecutive teeth and then ejected as the teeth mesh. The pump has no valves. It is a positive displacement pump and will deliver against high pressures. The output is a more even flow than…
Hydraulic Ram: The”SUNLABTECH” Hydraulic Ram comprises an acrylic base incorporating pulse and non-return valves and a supply reservoir on a stand, which is fed by the Hydraulics Bench. An air vessel above the valve chamber smooth’s cyclic fluctuations from the ram delivery. This apparatus is used to study the phenomenon and performance of hydraulic ram pump. Ram pump is a type of pump, which delivers water at high heads without any energy source …
Hydrostatic Pressure: Fluid Mechanics lab equipment: The” SUNLABTECH” module consists of a quadrant assembled to the arm of a scale that swings around an axis. When the quadrant is immersed in the water tank, the force that acts on the flat rectangular front surface exerts a momentum with respect to the supporting axis. The swinging arm is fitted with a tray and an adjustable counter balance. The tank has adjustable supporting legs for leveling. It has a drainage valve. A graduated scale indicates the level reached by the water inside the tank. This assembly is mounted on top …
Impact of a Jet Apparatus: Fluid mechanics lab equipment: The “LabTek” module consists of a cylindrical tank with lateral transparent surfaces where a nozzle, connected to the Hydraulics Bench is aligned with a device in which the problem surface is fitted. The vertical force made by the water against the surface is measured using calibrated weights that balance this force. Taking as a reference a gauge, which has been previously adjusted to a zero reference, we measure the force thanks to a mark that appears on the surface where the masses were placed. The dead …
Multi-Pump Test Rig: Fluid Mechanics lab equipment The “LabTek” Multi-pump Test Rig has been designed to demonstrate the operating characteristics (head flow curves and efficiency) of a series of different types of pumps, each having a broadly similar input power. The rig can accommodate both roto dynamic and positive displacement pumps, and is supplied with the most common example of each type as standard (I e a centrifugal pump and a gear pump). Ranges of other pump types are available as accessories, (including axial, turbine, flexible impeller …
Notch Tank Apparatus: The”LabTek” used to demonstrate different flow processes at different control structures in the open channel. In the closed channel, pressure components in a pipe are determined. The trainer includes a transparent experimental flume with upper limit, a height-adjustable sill and a closed water circuit. The water level in the experimental section is set with an adjustable plate weir at the water outlet. With a simple alteration, the experimental flume can be used as an open or closed channel. The water level must be low when investigating the open-channel…
Orifice and Mouth Piece Flow Apparatus: The “LabTek”module consists of a cylindrical methacrylate tank that enables to maintain a constant level and the Basic Hydraulic Feed System feeds that by the Hydraulics Bench. An orifice is an opening made in the side or bottom of tank, having a closed perimeter, through which the fluid may be discharged. A mouthpiece is short tube fitted to a same size circular opening provided in a tank so that…
Orifice and Venturi meter demonstrator: The equipment consists of a Venturi meter, variable area meter and orifice plate, installed in a series configuration to permit direct comparison. A flow control valve permits variation of the flow rate through the circuit. Pressure tappings are incorporated so that the head loss characteristics of each flow meter may be measured. These tapping’s are connected to an eight-tube manometer bank incorporating…
Osborne Reynolds Demonstration: Fluid mechanics lab equipment: The “LabTek” designed Osborne-Reynolds experiment is used to study the characteristics of a liquid flow through a pipe. It is also used to determine the Reynolds number at each state of the liquid. This module makes it possible to study the characteristics of the flow of a liquid inside a pipe and the behavior of such flow. Besides, it is possible to determine the…
Particle Drag Coefficients: Fluid Mechanics lab equipment: The Viscosity and Particle Drag apparatus is a simple falling-sphere viscometer. The self-standing unit holds two glass tubes filled with the test fluids, for comparisons and to minimize draining and refilling of the fluids after experimentation. The back plate has a low-voltage backlight so students can easily see the test spheres through the fluid. Students fill the two tubes with their chosen test fluid, and then select a sphere of the correct density and size for the fluid. They drop the sphere into the test fluid at…
Pascals Apparatus: Fluid Mechanics lab equipment: The ”LabTek” module allows demonstrating Pascal’s principle, that is to say, that pressure in an incompressible fluid has no relation with the size of the column section; it only depends on its head (level of the liquid) and on the nature of the liquid. For that purpose, the unit consists of three vessels with the same diameter on their base but different shape, so that they can be compared. It also allows to determine the hydrostatic pressure quantitatively and to study the linear relation between pressure and filling height…
Pipe Network Apparatus: The “ LabTek” designed freestanding accessory to the Hydraulics Bench demonstrates the characteristics of flow through different arrangements of pipes and the effect of changes in pipe diameter on the flow through a particular network. The permanent arrangement of PVC pipes and fittings is mounted on a freestanding support frame designed to stand alongside an Hydraulics Bench in use. Connection reinforced flexible tube and threaded union with ‘O’ ring seal, enabling connection to the without the use of tools. Isolating valves enable a…
Pipe Surge and Water Hammer Apparatus: The “LabTek” Advanced designed equipment is freestanding and comprises two stainless Steel test pipes connected to a constant head tank with the Necessary connections to an Hydraulics Bench. Pipe surge demonstrations are conducted using the first test pipe, which incorporates a transparent surge shaft, and lever operated valve at the discharge end. An additional Valve downstream allows…
Pitot Tube Apparatus: The “LabTek” designed pitot tube unit the change in flow speed within a tube can be determined. The Pitot static tube can be moved across the whole cross- section of the tube, and thus to measure the pressure profile. This tube is connected to manometers via hoses. The Pitot tube can be moved across the cross-section of the pipe in order to measure the dynamic head profile. The position of the measuring tip relative to the wall of the pipe can be read on a scale. The Pitot tube is connected to a pressurized water manometer to measure the differential head across…
Plunger Pump Demonstration Unit: fluid mechanics lab equipment: The” LabTek” designed motor-driven plunger pump, mounted on a stainless steel plinth with a water reservoir, pulsation damper and pipework for continuous circulation. The pump head, measuring tank, pulsation damper and the water reservoir are manufactured from clear acrylic for maximum visibility. The pump outlet is connected to both a sprung loading valve and a needle…
Precision Pressure Gauge Calibrator: Fluid Mechanics lab Equipment: The “LabTek “ designed equipment is self-contained and portable, so it may be used in lecture theatre demonstrations or as a master calibrator for the laboratory. Deadweight testers are the basic primary standard used worldwide for the accurate calibration of pressure gauges, pressure transducers etc. The instrument combines a low and high-pressure range…
Propeller Turbine: Fluid Mechanics lab equipment The Propeller Turbine is an inward flow reaction turbine, Similar to a Kaplan design, but with fixed blades. It is a very common turbine and works best with high flow rates. Its moving part (runner) is a propeller, similar to those that Push ships and submarines through water. The turbine has adjustable guide vanes that control the water flow in the turbine. They also direct the water at an angle to the back of the propeller. Students learn how the guide vane setting affects how the turbine works. The turbine has a clear viewing window around…
Series Parallel Pumps: Fluid mechanics lab equipment, The “LabTek” Module features a closed water circuit with a water tank and two centrifugal pumps with drive motors. The speed of one motor is variably adjustable by a frequency converter. The other pump is fitted with a motor with fixed speed; this pump can be added to the system. The impellers of both pumps are mounted in transparent housings and can be observed during operation. Valves enable to easily switch change between single pump, series or parallel pump operation. The system behavior is analyzed with the…
Subsonic Wind Tunnel: Fluid Mechanics lab equipment, The “LabTek”designed module is a small wind tunnel designed for bench top operation. Air is drawn through the working section by a variable speed fan at the discharge end of the tunnel. A honeycomb flow straightener is incorporated at the inlet, and a 9.4:1 contraction ratio ensures well-developed airflow through the working section. The working section is fabricated from clear acrylic to give good visibility of the models, and appropriate model connection points are included in the sidewall and roof of the working section…
Tilting Flume 4 Meter: Fluid mechanics lab equipment, The”LabTek” designed small open channel flume, available in 2.Sm or 5.0m lengths, with clear acrylic sides to the working section for total visibility of the flow. The channel is fitted with a PVC inlet tank, and is designed for free discharge into the Hydraulics Bench. The flume is mounted on a rigid framework, and can be tilted by use of a calibrated screw jack, which allows accurate slope adjustment of the channel. The inlet tank incorporates a stilling arrangement to diffuse the water flow prior to entry into the channel…
Our Products Collection
LabTek is manufacturer, supplier, solution provider and exporter of Fluid mechanics lab equipment, Hydrology lab equipment, Fluid power lab equipment, Fluid machinery lab equipment, Hydrostatics lab equipment, Hydraulics lab equipments. We are supplying the equipment to quality testing laboratories to civil builders, civil contractors, Engineering colleges, Universities and Polytechnics.
