LabTek is one of the leading manufacturer, supplier & exporter of the Fluid Machinery Lab Equipment or Tourbo Machinery Lab Equipment. We Manufacture Axial Flow Pump Test Rig, Computerized Axial Flow Pump, Computerised Centrifugal Pump Trainer , Computerised Francis Turbine Trainer, Computerised Gear Pump Test Rig, Computerised Hydraulic Ram Apparatus, Computerised Kaplan Turbine Test Setup, Computerized Reciprocating Pump Test Apparatus Multi Pump Test Rig, Multi Turbine Test Rig, Pelton Turbine Test Rig, Submersible Pump Test Rig etc.. Also We do manufacture the Test Rigs as per customers requirement. At LabTek, we understand the dynamics of each customer requirement and the variety of demands of their experimental & research system. We help you with innovative design that makes the system more reliable, robust, cost-effective and economical in long run, saving substantially on your power and maintenance cost. Computerised Francis Turbine Trainer,  Computerised Francis Turbine Test Rig,  fluid machinery lab equipment suppliers india, fluid machinery lab equipment manufacturers india. Computerised Reciprocating Pump Test Apparatus, plastic testing equipment manufacturer in india, testing equipments manufacturers, rubber testing equipment manufacturers india.

Computerised Reciprocating Pump Test Apparatus


 Model NO- TM-010


The “SUNLABTECH” designed and developed experimental unit provides the basic experiments to get to know the operating behavior and the important characteristic variables of piston pumps.

The test rig consists of a closed water circuit with water tank, a piston pumps with variable speed via a frequency converter and an air vessel. The piston of the pump is mounted in a transparent housing and can be observed during operation. The cycle that takes place (intake and discharge of water) can be shown clearly in the p-V diagram. The pulsating pressure curve of the pump can be damped with the aid of the air vessel. Flow rate and head are adjusted via a needle valve and overflow valve.

The experimental unit is fitted with sensors for pressure and flow rate. One pressure sensor measures the pressure at the outlet of the pump; another one measures the pressure in the inside of the cylinder. The position of the piston rod is measured by an angle sensor. This allows the determination of the cylinder volume. The microprocessor-based measuring technique is well protected in the housing. The measured values are transmitted directly to a PC via USB where they can be analyzed using the software included.


  • Principle of operation of a piston pump
  • Recording of pump characteristics
  • Pressure curves of delivery pressure and cylinder pressure
  • Influence of pulsation damping
  • Determination of efficiencies


  • Piston pump

Speed: 30…180min-1

Max. Flow rate: 135L/h

Max. Head: 40m

  • Drive motor

Power: 180W

  • Gear transmission ratio: 1=7,5
  • Measuring ranges

Pressure (cylinder): 0…5bar

Pressure (outlet): 0…5bar

Crank angle: 0…360°

Flow rate: 0,2…6L/min

  • 230V, 50Hz, 1 phase
  • 230V, 60Hz, 1 phase; 120V, 60Hz, 1 phase



  • LxWxH: 670x590x740mm
  • Weight: approx. 49kg

Computerized Francis Turbine Trainer

Computerized Francis Turbine Trainer: The “LabTek” designed and developed closed water circuit consists of a tank with optional cooling, a centrifugal pump and a flow control valve for adjusting the inlet pressure. The transparent operating area of the turbine enables an optimal view of water flow, rotor and guide vanes during operation. By adjusting the guide vanes the angle of attack....

Computerized Gear Pump Test Rig

Computerized Gear Pump Test Rig: The “LabTek” designed and developed gear pump is the most widely used of the positive action rotary pumps. Two gear wheels operate inside a casing. One is driven while the other rotates in mesh with it. The liquid is carried around in the space between consecutive teeth and then ejected as the teeth mesh. The pump has no valves. It is a positive displacement....

Submersible Pump Test Rig

Submersible Pump Test Rig: The”LabTek” designed and developed submersible pump Test Rig is a self-contained unit operated on closed circuit basis containing a sump tank. The set-up consists of a submersible pump coupled with a DC Motor. Power input to the DC Motor is varied by means of a Thruster controlled DC Drive to vary the RPM of motor. A RPM Indicator with Proximity sensor indicates the RPM of Pump. Flow of water is measured by using measuring tank and stopwatch. Vacuum gauge...

Computerised Reciprocating Pump Test Apparatus, plastic testing equipment manufacturer in india, testing equipments manufacturers, rubber testing equipment manufacturers india.

%d bloggers like this: