LabTek is one of the leading manufacturer, supplier & exporter of the Fluid Machinery Lab Equipment or Tourbo Machinery Lab Equipment. We Manufacture Axial Flow Pump Test Rig, Computerized Axial Flow Pump, Computerized Centrifugal Pump Trainer , Computerized Francis Turbine Trainer, Computerized Gear Pump Test Rig, Computerized Hydraulic Ram Apparatus, Computerized Kaplan Turbine Test Setup, Computerized Reciprocating Pump Test Apparatus Multi Pump Test Rig, Multi Turbine Test Rig, Pelton Turbine Test Rig, Submersible Pump Test Rig etc.. Also We do manufacture the Test Rigs as per customers requirement. At LabTek, we understand the dynamics of each customer requirement and the variety of demands of their experimental & research system. We help you with innovative design that makes the system more reliable, robust, cost-effective and economical in long run, saving substantially on your power and maintenance cost. Computerised Francis Turbine Trainer,  Computerised Francis Turbine Test Rig,  fluid machinery lab equipment suppliers india, fluid machinery lab equipment manufacturers india. Computerised Centrifugal Pump Trainer, electric car manufacturers in india, electric vehicle parts manufacturers, electric car battery manufacturers in india, ev component manufacturers in india, electric powertrain manufacturers in india.

Computerised Centrifugal Pump Trainer


 Model NO- TM-004


The “SUNLABTECH” designed & developed trainer includes a closed water circuit and a powerful, standard centrifugal pump. Standard pumps are built according to industrial standards. The standard defines rating schemes and key dimensions so that standard pumps from different manufacturers can be exchanged without replacing the piping and ground plate.

A three-phase motor powers the centrifugal pump. The speed can be adjusted to the desired value with the frequency converter. An inductive, non-contact position encoder on the engine shaft records the speed. The drive motor is mounted in a pendulum bearing such that the drive torque can be measured with a force sensor and the mechanical drive power can be determined.

Manometers display the pressure on the pump’s inlet and outlet. The flow rate is measured with an electromagnetic flow rate sensor. The flow rate can also be determined by means of a differential pressure measurement on an orifice plate flow meter. The speed, torque, and electrical power consumption of the pump and the flow rate are shown on a digital display on the switch cabinet.


  • Principle of operation of a centrifugal pump
  • Closed water circuit
  • Recording of pump characteristics
  • Recording of system characteristics
  • Manometer at the inlet and outlet of the centrifugal pump
  • Determination of the flow rate by means of an electromagnetic flow rate sensor or an orifice plate flow meter and a differential pressure measurement
  • Calculation of efficiencies



  • Centrifugal pump

Max. Flow rate: approx. 15m3/h

Max. Head: approx. 16m

  • Drive motor with variable speed

Power output: 1,1kW

Speed range: 0…2400min-1


  • Tank volume: 96L
  • Measuring ranges

Pressure: 1x -0,6…0bar, 1x 0…2,5bar

Flow rate: 5…600L/min

Speed: 0…5000min -1

Torque: 0…10Nm

Power consumption: 0…2,2kW

  • 230V, 50Hz, 1 phase
  • 230V, 60Hz, 3 phases


  • LxWxH: 2000x750x1480mm
  • Weight: approx. 215kg

Computerized Francis Turbine Trainer

Computerized Francis Turbine Trainer: The “LabTek” designed and developed closed water circuit consists of a tank with optional cooling, a centrifugal pump and a flow control valve for adjusting the inlet pressure. The transparent operating area of the turbine enables an optimal view of water flow, rotor and guide vanes during operation. By adjusting the guide vanes the angle of attack....

Computerized Gear Pump Test Rig

Computerized Gear Pump Test Rig: The “LabTek” designed and developed gear pump is the most widely used of the positive action rotary pumps. Two gear wheels operate inside a casing. One is driven while the other rotates in mesh with it. The liquid is carried around in the space between consecutive teeth and then ejected as the teeth mesh. The pump has no valves. It is a positive displacement....

Submersible Pump Test Rig

Submersible Pump Test Rig: The”LabTek” designed and developed submersible pump Test Rig is a self-contained unit operated on closed circuit basis containing a sump tank. The set-up consists of a submersible pump coupled with a DC Motor. Power input to the DC Motor is varied by means of a Thruster controlled DC Drive to vary the RPM of motor. A RPM Indicator with Proximity sensor indicates the RPM of Pump. Flow of water is measured by using measuring tank and stopwatch. Vacuum gauge...

Computerised Centrifugal Pump Trainer, electric car manufacturers in india, electric vehicle parts manufacturers, electric car battery manufacturers in india, ev component manufacturers in india, electric powertrain manufacturers in india.

%d bloggers like this: