Orsat Gas Analysis Apparatus
Make: LabTek
Model: SL-FT-017
Standard:
The analyzer set-up consists of the following components:
- The following components are contained in the VersaCase III as shown above using the support brackets.
- Graduated Glass Burette which is water jacketed for temperature stability.
- Three glass Absorption Pipettes containing absorbing reagents.
- The three pipettes are connected to the 3 compartment Tedlar® bag, which is hung behind the pipettes, by way of the valves on the gas expansion bag.
- A liquid filled Leveling Bottle that is used to move the sample through the Burette and Pipettes.
| Part # | Description |
|---|---|
| A-350 | Squeeze Bulb Pump. |
| GA-GL-18C | Solid Cap with #18 Threads and Seal. |
| GA-22C | #22 Solid Cap, #22 Threads with Seal |
| GA-30B | Bored Cap with #30 Threads, 22 mm ID. |
| GA-30S | Silicone Seal Ring #30 Threads, 22 mm ID. |
| OG-1V/18 | Burette, with 3-way Valve and Water Jacket, PTFE ValveBody, 100 mL, Scale 0-30% x .01. |
| OG-2 | Aspirator Bottle. |
| OG-5V | Contact Pipette, Valved, Insert Only. |
| OG-5B | Pipette Bottle with Hose Barb. |
| TB-3V-P | Gas Sampling Bag,Three Compartment with three Poly Valves. |
| TR-5/3 | Black Rubber Tubing, 5/16” OD x 3/16” ID, per foot. |
| CLP-2P | 2 inch tube clamp, green, w/ brass knurled nuts. |
| VSB3-OP | VersaCase Mounting Plate. |
Products Collection
The best way to experience wide collection of products is to visit the store.
