LabTek is a prominent and well established manufacturer, supplier, solution provider and exporter of Cement Testing Lab Equipment, building and civil engineering laboratory equipment.
Cement Testing Lab Equipment, concrete testing machine, Concrete testing lab equipment, building and civil engineering laboratory equipment and accessories. We are supplying the equipment to quality testing laboratories civil builders, civil contractors, Engineering colleges, Universities and Polytechnics. We manufacture the best quality Cement samplers, Le Chatelier flask, Le Chatelier moulds, Length comparator, Hydraulic shrinkage mould, High pressure Cement Autoclave, Blaine fineness apparatus, Standard Vicat apparatus, Flow tables for mortar and building lime, Air content meters, Flow cone apparatus, Marsh funnel viscometer, Vibrating machine, Cement curing cabinet as per the international standards and specifications. Cement testing lab equipment, cement testing equipment list, cement testing instruments, cement testing equipment manufacturers, road testing equipment.
Sun LabTek Equipments India Private Limited is manufacturer and suppliers of – Cement samplers – LabTek, Used to sample cement in bulk storages or shipment. Brass made, it consists of two concentric tubes with slots. Inside tube volume is 3 litres approx. Dimensions: dia. 40x1500mm. Weight: 5 Kg. .…
Le Chatelier flask – LabTek. As per Le Chatelier’s Principle, Specific gravity of hydraulic cement, dust, sand and other fine materials is determined by Le Chatelier’s Flask. IS code for Specific gravity test is IS 2720- Part 3. The body holds approximately 250ml. The oval bulb in the neck holds 17ml..
Le Chatelier moulds: LabTek : The soundness of cement, fly ash for concrete and lime is determined by using the Le Chatelier moulds and Le Chatelier Water Bath according to the relevant standard. The Le Chatelier Soundness Kit is supplied complete with; Le Chatelier moulds 3 pcs. 50×50..
Muffle Furnace is box type heat treatment equipment used to change physical properties of samples at very high temperature; for example 1100°C, 1200°C, 1300°C and more. These laboratory furnaces are widely used in scientific experiments in physics lab, rice laboratories, steel and paint industries, biotech companies and small industrial production etc. Their major applications include general laboratory testing, annealing, ash determination etc…
Standard Vicat apparatus: The Vicat frame consists essentially of a metal stand with a sliding rod. An adjustable indicator moves over a graduated scale. The needle or plunger is attached to the bottom end of the rod to make up the test weight of 300 g. The frame is supplied without accessories, which have to be ordered separately depending on the requirement. It is also proposed with basic EN accessories or ASTM/AASHTO accessories. Weight approx.: 4 kg…
Gillmore Needle Apparatus: is used to determine initial and final set times of Portland cement, masonry cement, hydraulic hydrated lime, and certain mortars in accordance with ASTM C266 and other standards. The adjustable support has horizontal arms to guide two weighted needles with flat-end cylindrical stainless steel tips. Base has ample flat shelf for positioning specimens. In testing the molded specimen for time of setting, the initial-set needle is 1/4lb …
SOUNDNESS OF HYDRATED LIME AND GYPSUM PLASTERS: Utilized for the determination of the soundness of hydrated lime, gypsum and building plasters. Consisting of a brass ring mould, 100 mm. diameter by 5 mm deep.
Blaine fineness apparatus : determines the fineness of Portland cement in terms of specific surface area expressed as the total surface area in square centimeters per gram of mortar or cement. The Blaine works by drawing a definite quantity of air through of bed of cement exhibiting a definitive porosity value. The number and size…
Manufacturer and supplier of Bulk density of cement apparatus: The weight of the particles and their volume is important so the relative density value is used in concrete mix calculations. The bulk density of bagged GP cement is approximately 1000-1300kg/m3 and Builders cement is approximately 1000-1250kg/m3….
Length comparator : LabTek : Length comparators measure length changes of hardened cement paste, mortar and concrete prismatic specimens. Indicators are mounted on a sturdy upright support attached to a solid triangular base. All units include an invar reference bar …
Hydraulic shrinkage mould 40x40x160 mm: LabTek : hydraulic shrinkage mould 40x40x160 mm controls cement testing potential alkaly reactivity expansion test. mortar bar hydraulic shrinkage mould …
Hydraulic shrinkage mould 25x25x285 mm : LabTek : This mould is the same used for the Expansion of Portland cement with the High pressure autoclave, conforming to ASTM C151 and ASTM C490.…
Automatic Vicat apparatus, Automatic setting time tester for cement, mortar and gypsum: The Vicat apparatus provides a completely automatic method for determining the initial and final setting time of cements or mortar pastes. The automated test operation provides for precise and repeatable results, which are automatically printed out from the integral printer built into the apparatus. It can also be connected to a PC ..
Flow tables for mortar and building lime: The Flow Table consists of a brass table top 250 ± 2.5 mm dia, mounted on a rigid stand. The table top is reinforced with equally spaced ribs and allowed to drop through 12mm by a ground and hardened cam. The Motor Drive assembly using the geared motor box is designed to rotate the cam through the shaft at 100 rpm. Complete with Flow mould …
Plunger penetration apparatus: The Plunger Penetration Apparatus is used to determine the consistency of fresh mortar, building lime and masonry cement. The test apparatus consists of a base to place the test cup and a vertical column holding the penetration plunger assembly. The drop default height is adjusted to 100 mm. The plunger assembly weight is 90 g. The Plunger Penetration Apparatus is…
High pressure Autoclave: LabTek : High Pressure Autoclave is specially developed for testing the volume consistency of mortar prisms. The Unit consists of a high pressure steam compartment with inner dimensions of 168mm diameter and a height of …
Two gang prism mould 25x25x285 mm to ASTM. This mould is the same used for the Expansion of Portland cement with the High pressure autoclave, conforming to ASTM C151 and ASTM C490…
Prism mould 25x25x280 mm to UNI: This mould is the same used for the Expansion of Portland cement with the High pressure autoclave, conforming to ASTM C151 and ASTM C490...
Prism mould 75x75x285 mm to UNI : Used for expansion test on concrete prisms to UNI 11604. Two gang prism mould 75x75x285 mm complete with contact points. Gauge length 250mm, total length 285 mm…
Prism mould 75x75x285 mm to UNI : Used for expansion test on concrete prisms to UNI 11604. Two gang prism mould 75x75x285 mm complete with contact points. Gauge length 250mm, total length 285 mm…
Steel measure, 400 ml : Used as a density method for the determination of the air content of freshly mixed mortars. Made of steel, 88.1 mm height x 76.2 mm internal diameter, it is calibrated to contain 400 ± 1 ml of water at 23°C. Weight approx.: 800 g , Accessories: Chattaway spatula. Made of pure…
The testing equipment consists of: Y-piece with Mohr clip; CO2 absorption tower for gas or air stream; dropping funnel; distillation flask with electric mantel heater and three-armed still head; condenser; wash bottle for concentrated sulphuric acid; two absorption U-tubes for Hydrogen Sulphide and water respectively; three absorption tubes for water and carbon dioxide. Two of them are to be weighted, the third…
Water retention apparatus: The apparatus is used in specification tests of masonry cement and physical testing of quicklime and hydrated lime. These tests include: ASTM D1506, ASTM C110 and ASTM C207. This test method provides a means for determining the ability of mortars and plasters to retain water under suction. Test results may be used to determine compliance with specifications. The results obtained using this test method can be used to compare the relative ability of mortars and plasters to retain water under suction…
The Solution Calorimeter for Cement and Concrete – is designed with a steel housing to protect the samples from environmental heat fluctuation as well as specimen-to-specimen heat transfer. Each measuring cell is also fitted with a heating element and thermoelectric conductive measuring chains for heat output readings. From the beginning of the test, the control device operates the procedure with a direct interface. The control stabilizes the thermal signal and amplifies it to be a measurable voltage. It also monitors…
Air content meters: These apparatus have been designed to determine the bair content in cement mortar, cement paste, and lime mortar. The testers are made of cast aluminium. The test pot and the upper part are sealed air-tight together by means of two quick-action spring clamps. The air ia compressed by means of a built-in hand pump. This air pump and the push buttons test and correction are arranged in a simple-to-use configuration on the front plate…
Reactivity test apparatus: Used for determining the reactivity on slaking of ground quicklime. The equipment consists of a 1000ml capacity Dewar vessel complete with cover, 300rpm electric stirrer, paddle, base, stand and a digital thermometer -50° to 200° C x 0.1° C., Power: 230V 50Hz 1ph, Dimensions: 400mm x 250mm x 750mm. Ground quicklime shall be tested for their reactivity with this apparatus …
Bulk density apparatus – LabTek : This apparatus is used for the measurement of the apparent density (bulk density) of powders and non-cohesive materials. It consists of sieve funnel with tripod, a 1 litre capacity unit weight measure, spatula, straight edge and an aluminium scoop.Dimensions: 350mm diameter x 520mm, with an 8mm diameter funnel discharge hole. Weight: 5 Kg. The discharge hole of the funnel has 8 mm dia…
Flow cone apparatus: Used for viscosity and fluidity determinations of mortars, muds, grouts, fluid materials, etc. Mortar fluidity is considered suitable when the flow time of 1000 cc of mortar is comprised between 17 to 25 seconds. Entirely brass made,it is supplied complete with four interchangeable nozzles dia.8 -9 -10 -11 mm, stand adjustable in heigh, plastic graduated cup.Cone top dia. is 155 mm, total lenght 290 mm, capacity 1700 cc…
Marsh funnel viscometer: Marsh funnel is used for routine viscosity determinations on almost every drilling rig. Made of rugged, break-resistant plastic that resist to the temperature change deformation. Volumetric accuracy is assured. Plastic handle provides insulation for user’s hand. A metal orifice assures accurate readings. Supplied complete with plastic measuring cup 1 liter capacity. Top dia.: 150 mm, Nozzle length and internal dia.: 50×50 mm..
Sand content of drilling muds: This kit provides a complete sieve analysis apparatus for determining the sand content of drilling muds. It consists of a special 2¼” diameter 200-mesh sieve, fastened inside a collar with a small funnel fitted top and bottom. This simple test is used to determine the volume percent sand-sized particles in a mud. The information is used to make adjustments in solids control equipment. Sand causes excessive wear on…
Three gang moulds 40x40x160 mm: Cement testing lab equipment, All moulds have been manufactured from steel and all internal surfaces are machined. All dimensions and specifications comply with the related standards. The 40x40x160 mm mould has the surface hardness to a minimum HV400.
50 mm three gang cube mould – LabTek : Cement testing lab equipment, The 50 mm cube specimens are produced for compression test. The dimension is compatible with ASTM C109. Made from steel, precisely machined. Weight approx.: 6 kg. hardness 55 HRB, it can be also used for soil and other materials.
Vibrating machine for 70.7 mm cube moulds: is used for the preparation and compaction of 70.7 mm mortar cube specimens.The mould table is mounted on four springs attached to an eccentric shaft which allows each sample to be vibrated at 12000 cycles per minute.
Cement curing cabinet: Cement testing lab equipment, Curing Cabinet is ideally used in commercial and on site laboratories for the standard curing of samples of concrete, cement and similar material.Frame is made of strong polypropylene structure, which is chemical resistant and particularly suitable for cement applications…
Cement curing bench-type cabinet: Cement testing lab equipment, A robust device for the efficient mixing of cement mortars, this mixer is a table mounted unit with planetary mixing action and a bowl and beater that are easily fitted and removed. The front grill, when opened, automatically stops the machine for…
Circulating water bath with cooler unit: Cement testing lab equipment, This multi-purpose digital unit, fit with cooler unit and recirculating water system, is used to condition in water asphalt specimens for Marshall and Indirect tensile test. Determination of the indirect tensile strength of bituminous mixtures, prescribe a water..
Automatic range of 200 kN, 300 kN and 600 kN, Cement testing lab equipment capacity flexure testing machines have been designed for reliable and consistent testing of flexural test on standard concrete beams, concrete or natural stone kerbs, concrete paving flags, and natural stone slabs and tensile splitting test of concrete paving…
The Compression & Flexural testing, Cement testing lab equipment product line offers a wide variety that will fit almost any budget. Different options between models include digital or analog display, single or dual range, and different types of configurations. All the Compression & Flexural testing machines conform to..
Flexural test devices for mortar beams: Cement testing lab equipment. Double upper bearer for third point test and center. Total height: 370 mm when adjusted for 150 mm beams and 320 mm for 100 mm beams. The 370 mm vertical daylight can easily obtained removing the lower platen of the compression tester..
Our Products Collection
Cement Testing Lab Equipment, concrete testing machine, Concrete testing lab equipment, building and civil engineering laboratory equipment and accessories.
Feel Free To Contact Us For More Information
Cement Testing Lab Equipment
We manufacture the best quality Cement samplers, Le Chatelier flask, Le Chatelier moulds, Length comparator, Hydraulic shrinkage mould, High pressure Cement Autoclave, Blaine fineness apparatus, Standard Vicat apparatus, Flow tables for mortar and building lime, Air content meters, Flow cone apparatus, Marsh funnel viscometer, Vibrating machine, Cement curing cabinet as per the international standards and specifications. Cement testing lab equipment, cement testing equipment list, cement testing instruments, cement testing equipment manufacturers, road testing equipment.